Skip to Content

5 Best 6 Foot Snake Enclosures: Sizes, Materials & Costs [2026]

This site is supported by our readers. We may earn a commission, at no cost to you, if you purchase through links.

6 foot snake enclosure

A six-foot snake needs a cage only 24 inches wide. That surprises most first-time buyers, but a width equal to one-third of the animal’s length is exactly what lets a terrestrial snake turn, stretch, and build a working thermal gradient.

The harder decisions sit elsewhere. A 6 foot snake enclosure can weigh 200 pounds assembled or arrive as a flat-pack needing a mallet and a second person, and prices stretch from $387.88 to $1,197.00. Material also dictates your heating: PVC holds heat on low wattage, while glass bleeds it.

Here are five 72-inch options, ranked by the trade-offs that decide your setup.

Key Takeaways

  • You’ll only need a 24-inch-wide cage for a six-foot terrestrial snake, because a width of one-third the snake’s length lets it turn, stretch, and set up a working heat gradient, though arboreal climbers will feel the 24-inch height limit.
  • PVC costs more to buy than glass in some cases but holds heat and humidity on lower-wattage heating, while glass loses both and runs your heater constantly, though it’s the safer choice over under-tank heat.
  • You can pay anywhere from $387.88 to $1,197.00 for a 72-inch enclosure, and the real cost depends on weight, assembly effort (a 200-pound pre-assembled unit versus a flat-pack that needs tools and a helper), and whether bulbs are included.
  • You’ll get a safe setup by checking that door latches truly lock, balancing vents at the cool and warm ends, and using more than one heat source to build a 88–92°F warm side and a 78–80°F cool side.

5 Snake Enclosures for a Six-Foot Shortlist

A six-foot snake needs an enclosure that holds a proper thermal gradient and locks securely, so the five options below are the ones worth your attention.

Since boas outgrow starter homes quickly, this guide to the right tank size for a boa helps you plan dimensions early.

Each one is built around the 72″×24″×24″ footprint, which means you’ll be comparing finish, construction, and fit rather than basic capacity.

Read through them with your own snake’s length and your heating setup in mind, because the right match will save you from rebuilding later.

1. New Age Pet 72 Mojave Reptile Enclosure

The EHRML17-05JMB, finished in Jumbo Grey, is built from moisture-resistant ECOFLEX polymer wood composite with dual-layer PVC boards and air gaps, so it holds heat well and lets your lamps run less often. Front sliding tempered glass doors lock with a bracket, giving you visibility without sacrificing security, while the wire mesh top and vented side panels handle lamps and airflow.

It isn’t watertight or chew-proof, so skip aquatic species and gnawers, and seal seams with silicone against escaping feeders.

Best For Keepers of medium-sized reptiles like bearded dragons, ball pythons, skinks, and tortoises who want an easy-to-assemble, heat-retaining enclosure.
Door Type Sliding glass
Material ECOFLEX composite
Top Design Wire mesh top
Ventilation Vented side panels
Dimensions 22.6″ x 10.39″ x 10.28″ interior
Water Resistance Not watertight
Additional Features
  • 10-year warranty
  • Matching stand available
  • Tool-free assembly
Pros
  • Insulated ECOFLEX polymer wood composite with dual-layer PVC boards and air gaps holds heat well, so external heating lamps don’t need to run as often.
  • Front sliding tempered glass doors lock with a bracket, giving you a clear view of your pet and secure access.
  • Lightweight and tool-free, it assembles in 20–30 minutes with all hardware and instructions included.
Cons
  • It isn’t watertight, so it’s unsuitable for species that need standing water in their habitat.
  • The ECOFLEX material isn’t chew-proof, which is a risk for animals that gnaw on enclosure surfaces.
  • The mesh top and wall seams may need silicone sealing to keep small feeder insects from escaping.

2. New Age Pet Mojave Reptile Enclosure

New Age Pet® ECOFLEX® 60" B0D9RFXC64View On Amazon

If you’d rather save floor space, the 60-inch model, EHRML17-02XL, steps down from the previous unit while keeping its layout. Interior dimensions run 58.43"L x 21.97"W x 20.16"H, which suits snakes that stay under six feet. Sliding glass doors lock with brackets, and the mesh top and vented sides manage lamps and airflow.

Mesh lids like the one here are the hallmark of a screen-top snake tank, which makes mounting heat lamps and keeping air moving easier.

Keep lamps clear of the ECOFLEX, since heat can damage it, and skip determined chewers or aquatic animals. Lightweight panels and included hardware ease assembly and moving.

Best For Reptile keepers who want a spacious, lightweight 60-inch enclosure for snakes, lizards, or tortoises that don’t need standing water.
Door Type Sliding glass
Material ECOFLEX composite
Top Design Wire mesh top
Ventilation Vented side panels
Dimensions 58.43″ x 21.97″ x 20.16″ interior
Water Resistance Not watertight
Additional Features
  • Recycled polymer material
  • Odor-resistant surface
  • Includes assembly hardware
Pros
  • Sliding glass doors with locking brackets give secure, easy access.
  • The mesh top and vented sides support heat and UV lighting while keeping air moving.
  • Lightweight ECOFLEX panels resist moisture, hold less odor, and make assembly and moving simpler.
Cons
  • The enclosure is not watertight, so it won’t work for animals that need standing water.
  • Lamps must be placed carefully to keep heat from damaging the ECOFLEX material.
  • ECOFLEX isn’t chew-proof, so determined animals can damage it.

3. Crawl Creations 180-Gallon Reptile Enclosure

If your snake has outgrown the 60-inch footprint, this Crawl Creations enclosure gives you a full 72″×24″×24″ of room. The TFL laminate body carries a UV clear coat that resists water and scratches, and it arrives fully assembled. The hard top holds ventilation, two heat lamp fixtures, and a 3 ft T8 UVB strip fixture.

Bulbs aren’t included, so buy a 36-inch UVB tube; LED "T8 replacement" tubes emit no UVB. The sliding acrylic doors lack grips, which complicates opening.

Best For Owners of medium to large dry-climate reptiles, like bearded dragons, who want a roomy 72-inch enclosure that arrives ready to use.
Door Type Sliding acrylic
Material TFL laminate wood
Top Design Hard top
Ventilation Integrated ventilation
Dimensions 72″ x 24″ x 24″
Water Resistance Water-resistant surface
Additional Features
  • Includes two heat lamps
  • Includes UVB fixture
  • Scratch-resistant surface
Pros
  • It arrives fully assembled, so you can set it up right away without tools or installation.
  • It includes two heat lamp fixtures and a 3 ft T8 UVB strip fixture, along with a hard top that has built-in ventilation.
  • The water- and scratch-resistant surface stays clean-looking, and the front sliding acrylic doors give you a clear view for feeding and cleaning.
Cons
  • The UVB and heat bulbs are sold separately, so they add to the total cost.
  • You need a true 36-inch T8 reptile UVB tube, because household LED "T8 replacement" tubes give off no UVB and may flicker.
  • The sliding doors have no integrated handles, which can make opening and closing them awkward.

4. 180 Gallon Slate Grey Reptile Enclosure

The Slate Grey version shares the same 72″×24″×24″ footprint, so the choice comes down to finish and your room’s palette. It’s built from TFL laminate with a UV clear coat, and its front sliding acrylic doors keep disturbance low during feeding and cleaning. Plan for the weight, though. At 200 pounds, it arrives fully assembled, so position it before you stock it.

Before you settle on this size, our desert snake habitat creation guide explains how to match enclosure length to your snake’s adult size.

Bulbs aren’t included, and the dry-climate design suits arid species, not humidity-hungry ones. Buy a T8 UVB tube.

Best For Owners of medium to large dry-climate reptiles, such as bearded dragons and tortoises, who want a ready-to-use enclosure with a sturdy top that supports heat and UVB lighting.
Door Type Sliding acrylic
Material TFL laminate wood
Top Design Hard top
Ventilation Integrated ventilation
Dimensions 72″ x 24″ x 24″
Water Resistance N/A
Additional Features
  • 180-gallon capacity
  • Arrives fully assembled
  • Includes two heat lamps
Pros
  • Arrives fully assembled, so no tools or complicated setup are needed before use.
  • Front sliding acrylic doors give clear visibility and easy access for feeding and cleaning.
  • Comes with two heat lamp fixtures and a 3 ft T8 UVB strip fixture, and the hard top has built-in ventilation.
Cons
  • At 200 pounds, it is heavy, so you need to choose its spot before stocking it.
  • UVB and heat bulbs are sold separately, and household LED "T8 replacement" tubes may flicker or provide no UVB.
  • It is designed for dry-climate reptiles, so it does not suit aquatic or humidity-loving species.

5. Crawl Creations 180 Gallon Walnut Reptile Enclosure

A walnut-finished enclosure like this one gives you 72" x 24" x 24" of dry-climate floor space, which comfortably holds a stretched-out snake plus hides and a water bowl. It arrives fully assembled, so you can skip tools and start arranging furnishings immediately. Two heat lamp fixtures and a 3 ft T8 UVB strip are included, but bulbs are sold separately, and household LED tubes may flicker.

Plan for 200 pounds of weight, which means you’ll want a sturdy, level stand and help moving it.

Best For Owners of bearded dragons, snakes, or tortoises who want a large, ready-to-use enclosure for a dry-climate habitat.
Door Type Sliding acrylic
Material TFL laminate wood
Top Design Hard top
Ventilation Integrated ventilation
Dimensions 72″ x 24″ x 24″
Water Resistance N/A
Additional Features
  • California Walnut finish
  • Includes UVB fixture
  • Arrives fully assembled
Pros
  • Arrives fully assembled, so there are no tools or complicated setup before you can start arranging the habitat
  • Spacious 72" x 24" x 24" interior gives ample floor space, with sliding acrylic doors for clear viewing
  • Includes two heat lamp fixtures and a 3 ft T8 UVB strip fixture, plus built-in ventilation
Cons
  • Bulbs are sold separately, and household LED T8 tubes may flicker
  • At 200 pounds, it needs a sturdy, level stand and help moving it
  • Designed only for dry-climate reptiles, so it isn’t suitable for aquatic species

Six-Foot Enclosure Dimensions and Species Fit

six-foot enclosure dimensions and species fit

A 72" x 24" x 24" footprint works out to roughly 180 gallons, and that extra 24 inches over a 4x2x2 ft build is what lets an adult corn snake, usually four to six feet long, stretch fully without bunching. Terrestrial species benefit most, since the 24-inch width equals one third of a six-foot body length, enough to turn and set up a thermal gradient.

Because gallon labels describe volume rather than living space, it helps to check the usable internal dimensions after accounting for frames, door tracks, and backgrounds.

Height is the limiter. Arboreal snakes need 1.5 to 2 times their body length in vertical space, so a 24-inch ceiling cramps climbers and shortens their natural range. Offset that with vertical branches and shelves.

For large pythons beyond 4.5 feet, this size is your practical floor. Semi-aquatic species often outgrow it once you add a swimming zone.

PVC, Glass, and Wood Enclosure Trade-Offs

pvc, glass, and wood enclosure trade-offs

Glass costs less on day one, but PVC costs less every day after. That’s the heart of the glass vs PVC enclosures decision at six feet: glass bleeds heat and humidity through its walls and mesh lid, so your heater runs constantly, while PVC construction holds both and lets you use a lower-wattage heater.

Glass saves money at checkout, but PVC quietly pays you back every month through lower heating bills

Glass does have one advantage: it’s safe over under-tank heat, while PVC isn’t, so you’ll need radiant panels. Glass is also heavy and its silicone seams eventually need resealing, whereas PVC is light and resists mold.

A handcrafted wood 6-foot vivarium with furniture-grade finishes suits arid species, but unsealed surfaces swell and rot in humidity. A custom acrylic reptile habitat sits in between, at higher cost.

Door Security and Ventilation Features

door security and ventilation features

Picture a hatchling slipping through the gap beneath a loosely seated front sliding door overnight. It happens, and it’s why door security and ventilation features matter more than price.

Check the latch first. New Age Pet’s slide-pin latch engages a track slot, but its adhesive mount can loosen, while Crawl Creations’ large front lock suits strong snakes better. PVC models with heavy-duty 1/4-inch glass add a dedicated lock, yet you should still confirm the track reaches the substrate barrier, or escapes remain possible.

A ventilated screen top breathes well but obstructs roughly 35% of lamp output, so pair it with lower vents at the cool end and upper vents at the warm end. Weak reptile enclosure ventilation invites stale air.

Heating and Furnishing a Six-Foot Snake Enclosure

Will one heat source keep a six-foot snake enclosure properly warmed? No, and relying on one creates a single hotspot instead of a usable gradient.

Mount a ceramic heat emitter or radiant panel on the warm side, because it warms the air without visible light, and pair it with a thermostat-controlled heat mat covering one-third of the floor. Target 88–92°F at the surface, verified with an infrared thermometer, and 78–80°F on the cool side, so nights never fall below 72–75°F.

Skip red lamps, since reptiles see red and stress follows. Good reptile heating systems support thermoregulation across temperature gradients. Add snug hides at both ends, a damp humidity hide, and sturdy driftwood branches, or your snake loses microclimates it needs.

Total Cost, Delivery, and Assembly

total cost, delivery, and assembly

What does a six-foot enclosure really cost once it’s sitting in your reptile room? The sticker price is only the first number, and it rarely decides the outcome on its own.

New Age Pet’s 72-inch Mojave has ranged from $387.88 to $599.99, averaging about $511.23 lately, so waiting on a dip can save you real money. Crawl Creations holds its 180-gallon wooden unit at a flat $1,197.00 in any finish, but free standard shipping and zero assembly narrow that gap. Flat-pack PVC runs $449.00 to $525.00 and ships by standard carrier, never to PO Boxes.

Plan your labor honestly. The Mojave goes together in 20 to 30 minutes with included hardware, while flat-pack PVC needs a mallet, a drill, and a second person. Heavy pre-assembled wood arrives by freight, usually after three days, so clear a path first.

Frequently Asked Questions (FAQs)

How often should a snake enclosure be cleaned?

Spot clean every time you check the enclosure, removing feces, urates, shed skin, and wet substrate right away. Replace substrate every 2 to 4 weeks, then deep clean monthly, scrubbing and disinfecting everything inside.

How much humidity does a six-foot enclosure need?

You might assume length changes the number, but it doesn’t. Humidity depends on species, so match your snake: 50-60% baseline for ball pythons, 65-75% for corn snakes, 70-95% for boas. Wrong targets risk bad sheds.

Can two snakes share one enclosure?

Usually not. Most snakes are solitary, and sharing invites cannibalism, resource competition, and disease spread. Garter, ring-necked, and DeKay’s brown snakes of similar size are the main exceptions, but even they need a much larger snake enclosure.

Can an enclosure be too big for a snake?

Picture a snake pressed against a glass wall, tongue flicking at a room it can’t escape, exposed from every angle. Size isn’t the problem; bare sightlines are. Add dense cover, deep substrate, and hides, and your thermal gradient stays intact.

What substrate works best for a large snake?

Many keepers assume one bedding suits every large snake, but that’s false, because species humidity needs decide it. Choose coconut fiber or cypress mulch for tropical species, aspen for dry ones, and avoid cedar, pine, and sand.

What size hide box suits a large snake?

Professional large hides for adult pythons and boas run roughly 25 by 25 by 25 inches up to 25 by 11 by Choose a snug fit, since your snake should touch every wall when coiled.

Conclusion

Picture a keeper who buys a glass tank for a boa, then spends winter stacking heat lamps to hit 88 degrees. A PVC unit would’ve held that temperature on half the wattage.

That’s the lesson here. Your 6 foot snake enclosure isn’t a size decision alone, because material, door security, and delivery shape your daily routine for years. Choose the build that fits your heating plan and floor space, and the snake does the rest.

Avatar for Mutasim Sweileh

Mutasim Sweileh

I’ve spent the last decade keeping and learning from snakes, with a special love for ball pythons, corn snakes, and boas. I write practical, gentle care advice for new and growing reptile keepers because I believe confidence, patience, and good husbandry make all the difference.